金属探测器常见问题解答:

With a food metal detector, what is the best way to place the food products if they are wet or conductive?

For wet and conductive food products, center the package vertically in the head, ensuring the same amount of distance is above and below the package. Often this means that the head height will be larger than the standard sizing recommendation. This helps reduce the product signal by moving the product away from the electromagnetic coils.

使用食品金属探测器时，如果食品是湿的或导电的，放置食品的最佳方式是什么？

答案:

对于潮湿且导电的食品，请将包装垂直居中放置在头部，确保包装上方和下方的距离相同。通常这意味着头部高度将大于标准尺寸的建议。这有助于通过使产品远离电磁线圈来减少产品信号。

Are there environmental factors that can interfere with finding metal contaminants using a food metal detector?

Small metal foreign objects have very small signals, and the food metal detector is operating in a factory that has many possible noise sources that can confuse the metal detector electronics and software. Make sure you address some of these sources that can interfere with your testing:

- Large motors turning on and off

- Electronics boxes broadcasting wide spectrums of radiated noise

- Production equipment vibrating and causing the antenna in the metal detector to move ever so slightly

- Electrical power surging and dropping

- Temperatures going from freezing to boiling and back again

是否有环境因素会干扰使用食品金属检测仪发现金属污染物？

答案:

小的金属异物有非常小的信号，食品金属探测器是在工厂中操作，有许多可能的噪声源，可以混淆金属探测器的电子和软件。确保您解决了可能会干扰您的测试的一些来源:

-大型电动机的开启和关闭

-广播宽频谱辐射噪音的电子箱

-生产设备振动，导致金属探测器天线轻微移动

-电力波动和下降

-温度从冰点到沸点，然后又回到冰点

What is the ideal size for the food metal detector head?

The size of the food metal detector head is based on the dimensions of the food package. Always simulate production conditions as closely as possible, including speed, temperature, and orientation of the product.

食品金属探测头的理想尺寸是多少？

答案:

食品金属探测头的尺寸是根据食品包装的尺寸来确定的。始终尽可能模拟生产条件，包括产品的速度、温度和方向。

What is the best way to ensure that the food metal detector "auto learns" accurately?

For all food grade metal detectors, eliminate as much background noise as possible. Then start with the manufacturer's default settings. Ensure that production samples are used for setup.

确保食品金属探测器“自动学习”准确的最好方法是什么？

答案:

对于所有的食品级金属探测器，尽可能消除背景噪音。然后从制造商的默认设置开始。确保生产样品用于设置。

With a food metal detector, what should I do if metal is missed?

When metal is missed on the leading or trailing edges of a standard food grade metal detector, adjust sensitivity per the manufacturer's recommendation and when required, increase metal size until it is detected.

有了食品金属检测机，如果漏检金属，我该怎么办？

答案:

如果标准食品级金属检测机的前缘或后缘未检测到金属，请根据制造商的建议调整灵敏度，必要时增加金属尺寸，直至检测到金属。